Inhaltsverzeichnis
8. Devices
Measurement devices can be activated and deactivated to make the measurement bar clearer for deposits and valinos orders.
Activate/ deactivate devices
2D Scanner
With activating the checkbox 
„Device installed“ the device will be activated.
3D Scanner
With activating the checkbox 
„Device installed“ the device will be activated.
Pressure plate
With activating the checkbox 
„Device installed“ the device will be activated.
insole pressure measurement
With activating the checkbox 
„Device installed“ the device will be activated.
individual settings
2D Scanner
Only one foot
This option is for scanners that can only measure one foot or for importing individual measurements that still need to be processed in the scan window.
show scanner dialog
By activating the checkbox, the scanner dialog is displayed by the scanner driver. This is necessary, for example, for a scanner from the manufacturer Mustek.
Show resolution dialog
If this option is activated, the resolution dialog will be displayed each time you import, so that you can adjust the resolution individually for each measurement.
Use resolution from file
The resolution from the file which was imported is always used if the resolution dialog is not displayed.
standard resolution
+ 
Set the default resolution for the X- and Y- directions for importing measurements here. Mostly used values of the manufactures.
| Manufacture | X | Y |
|---|---|---|
| easyped | 72 dpi | 72 dpi |
| Rotballer | 150 dpi | 150 dpi |
Bearbeiten
3D Scanner
For further manufacturer-specific settings, please contact the pedcad Service.
pressure plate
For further manufacturer-specific settings, please contact the pedcad Service.
insole pressure measurement
For further manufacturer-specific settings, please contact the pedcad Service.