FIXME **This page is not fully translated, yet. Please help completing the translation.** \\
//(remove this paragraph once the translation is finished)//
====== Options ======
- [[:en:pedoffice:optionen:start#general|General]]
- [[:en:pedoffice:optionen:start#database|database]]
- [[:en:pedoffice:optionen:start#user|user]]
- [[:en:pedoffice:optionen:start#email|E-Mail]]
- [[:en:pedoffice:optionen:start#locations|locations]]
- [[:en:pedoffice:optionen:start#licensing|Licensing]]
- [[:en:pedoffice:optionen:start#standard_values|Standard values]]
- [[:en:pedoffice:optionen:start#devices|Devices]]
- [[:en:pedoffice:optionen:start#prices|Prices]]
{{:en:pedoffice:optionen:optionen_en.png?nolink&600x324}}
===== 1. General =====
{{:en:pedoffice:optionen:optionen_allgemein_en.png?nolink&700x378}}
==== 1. Shoe size system ====
The shoe size system can be set at this point.
* EUR (standard)
* Mondopoint
* UK
* US
* JAPAN
==== 2. unit - length ====
The length units that the pedoffice should send is set here.
* mm (standard)
* cm
* in
* ft
==== 3. unit - weight ====
The weight units can also be adjusted.
* kg (standard)
* g
* lb
==== 4. location ====
If there are several [[:en:pedoffice:optionen:start#locations|locations]] in the database. The location of this workplace can be set here.
==== 5. language ====
The following languages are available in pedoffice.
* German
* English
* Polish
==== 6. PEDCAD dealer number ====
In order to be able to order from pedcad valinos or insoles, your customer number must be entered here. Please note that each location directly supplied by pedcad has its own customer number.
==== 7. order register ====
Is the directory / interface to your own Picturs by PC. {{:pedoffice:optionen:optione_de_01_7.png?400}}
==== 8. Company image ====
Here you can set your own company logo. This replaces the pedcad logo in the login screen.
==== 9. Logging ====
In the event of program errors, the protocol level can be adjusted here.
* Debug
* Warnings
* Error (default)
* Major
==== 10. Submit customer data ====
If this option is activated, in addition to the first name, surname and date of birth, the customer address will also be sent to pedcad for orders.
==== 11. Submit billing data ====
If this option is activated, in addition to the first name, surname and date of birth, the customer's billing address and insurance data for orders are also transmitted to pedcad.
==== 12. Workflow ====
There are two ways to send your order to pedcad.
* Standard workflow \\ The orders are immediately sent to pedcad when you click on send.
* Shopping cart workflow \\ The orders are first placed in the shopping cork in order to be bundled and transmitted to pedcad at a later point in time.
===== 2. database =====
{{:en:pedoffice:optionen:optionen_datenbank_en.png?nolink&700x378}}
==== 1. data folder ====
Path in which the measurements are located and in the case of file-based database the database is located.
==== 2. database ====
The database type can be changed from file-based database to SQL server here. The SQL server is recommended for large databases or multiple pedoffice clients. To set it up, please contact pedcad Service by email ([[service@pedcad.de|]]).
==== 3. server ====
Name of the SQL server
Example: servername \ inset name or 192.168.178.1 \ inset name
==== 4. Database name ====
Name of the database ((only with SLQ server)) )
Example: pedoffice
==== 5. Authentication ====
Type of the login procedure for the database ((2)) )
* Windows authentication only possible with a domain controller (user or user group share)
* SQL server authentication (SQL user)
==== 6. Username ====
Name of the SLQ user ((only with SQL server authentication))
==== 7. Password ====
Password of the SLQ user. ((Only with SQL server authentication))
===== 3. user =====
The pedoffice users can be managed here. {{:en:pedoffice:optionen:optionen_benutzer_en.png?nolink&700x378}}
==== Search users ====
By entering all or part of the first, last or user name in the search field (11) and then clicking on the button (12), the user list (red frame) is filtered accordingly.
To cancel the filtering, click on the button (13).
==== Create new user ====
- To create a new user, click on (9) New.
- Enter the user's first name in (1).
- Enter the user's last name in (2).
- Enter the user name - this is the name that must be entered by the user on the login screen in (3).
- If the user is to receive administrator rights in Pedoffice, the checkbox must be activated.
- Enter the password, this is the password that must be entered by the user in (5) and (6) on the login screen.
- Then click on (7) Save.
==== Change user ====
- To change a user, select the user to be changed from the user list (red frame). You can also use the [[:en:pedoffice:optionen:start#search_user|Search user]] button beforehand.
- Now make the required changes in fields (1) - (4). Enter a new password in field (5) if required and repeat the entry in field (6).
- Then click on Save (7).
==== Delete user ====
Please note that only administrators can delete users. It is also __ ** not recommended ** __ delete the administrator user.
- To delete a user, mark the user to be deleted in the user list (red frame). You can also search for the user beforehand.
- Make sure that you have selected the correct user and then click on Delete (10).
- Confirm the deletion of the user by clicking on YES. Clicking on No cancels the deletion process.
===== 4. Email =====
These settings are used to send orders to pedcad. Please make changes to these settings only after consulting the [[service@pedcad.de|pedcad Service]]. {{:en:pedoffice:optionen:optionen_e-mail_en.png?nolink&700x378}}
==== Set / reset to standard settings ====
To get to the standard settings:
- Activate the Standard settings checkbox (1).
- deactivate the standard settings checkbox (1).
- Enter your email address in the Sender field (4).
- Click the Save button (9).
==== Port ====
If you have problems sending you can change the port (3) from 25 to 587.
===== 5. Locations =====
Branches (locations) can be created here. These can be selected in the [[:pedoffice:order:start|orders]] to track from which location the order comes and where it should be delivered. {{:en:pedoffice:optionen:optionen_standorte_en.png?nolink&700x379}}
==== Create location ====
- Click the New button (8)
- Enter the name of your location in the Description field (1). This value is displayed in the selection.
- Enter your company name in the Address 1 (2) field.
- Fill in the remaining fields (3) - (5) with the address of the location.
- Then click on the save button (6).
==== Change location ====
- Mark the location to be changed in the location list (red frame).
- Make the required changes in fields (1) - (5)
- Then click on the save button (6).
==== Delete location ====
- Mark the location to be changed in the location list (red frame).
- Make sure that you have selected the correct location and then click on Delete (9).
- Confirm the deletion of the location by clicking on YES. Clicking on No cancels the deletion process.
===== 6. Licensing =====
This is where the values for licensing are displayed or the settings for network licensing are made. Only make changes after consulting the pedcad service. Otherwise there is a risk that pedoffice will stop working.
{{:en:pedoffice:optionen:optionen_lizenzierung_en.png?nolink&700x378}}
===== 7. Standard values =====
{{:en:pedoffice:optionen:optionen_standardwerte_en.png?nolink&700x379}}
[[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_01.png|{{:pedoffice:blau_01.png?direct&20|01}}]]The following default values can be configurated: Standard footbed shape of valinos orders
This is displayed behind the measurement until the - footbed shape - footbed variant - footbed design is defined in the configuration view.
[[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_02.png|{{:pedoffice:blau_02.png?direct&20|02}}]]standard insoles
This is displayed behind the measurement until the insole type or shoe type is is defined in the configuration view.
**Changing standard values**
- Change the desired value in the fields [[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_01.png|{{:pedoffice:blau_01.png?direct&20|01}}]]-[[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_03.png|{{:pedoffice:blau_03.png?direct&20|03}}]].
- Then click save [[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:disket.png|{{:pedoffice:disket.png?direct&30|Speichern}}]].
**Delivery state of the standard values**
[[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_01.png|{{:pedoffice:blau_01.png?direct&20|01}}]]valinos [[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_02.png|{{:pedoffice:blau_02.png?direct&20|02}}]]CA-PVP-0-KL-Schuh [[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_03.png|{{:pedoffice:blau_03.png?direct&20|03}}]]Spreizfuß
===== 8. Devices =====
Measurement devices can be activated and deactivated to make the measurement bar clearer for deposits and valinos orders.
{{:en:pedoffice:optionen:optionen_geraete_en.png?nolink&700x379}}
==== Activate/ deactivate devices ====
=== 2D Scanner ===
With activating the checkbox [[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_01.png|{{:pedoffice:blau_01.png?direct&20|01}}]] "Device installed" the device will be activated.
=== 3D Scanner ===
With activating the checkbox [[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_08.png|{{:pedoffice:blau_08.png?direct&20|08}}]] "Device installed" the device will be activated.
=== Pressure plate ===
With activating the checkbox [[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_09.png|{{:pedoffice:blau_09.png?direct&20|09}}]] "Device installed" the device will be activated.
=== insole pressure measurement ===
With activating the checkbox [[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_10.png|{{:pedoffice:blau_10.png?direct&20|10}}]] "Device installed" the device will be activated.
==== individual settings ====
=== 2D Scanner ===
== Only one foot ==
[[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_02.png|{{:pedoffice:blau_02.png?direct&20|02}}]]This option is for scanners that can only measure one foot or for importing individual measurements that still need to be processed in the scan window.
== Scanner-Dialog anzeigen ==
[[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_03.png|{{:pedoffice:blau_03.png?direct&20|03}}]]By activating the checkbox, the scanner dialog is displayed by the scanner driver. This is necessary, for example, for a scanner from the manufacturer Mustek.
== Show resolution dialog ==
[[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_04.png|{{:pedoffice:blau_04.png?direct&20|04}}]]If this option is activated, the resolution dialog will be displayed each time you import, so that you can adjust the resolution individually for each measurement.
== Use resolution from file ==
[[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_05.png|{{:pedoffice:blau_05.png?direct&20|05}}]]The resolution from the file which was imported is always used if the resolution dialog is not displayed.
== standard resolution ==
[[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_06.png|{{:pedoffice:blau_06.png?direct&20|06}}]]+ [[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_07.png|{{:pedoffice:blau_07.png?direct&20|07}}]]Set the default resolution for the X- [[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_06.png|{{:pedoffice:blau_06.png?direct&20|06}}]] and Y- [[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_07.png|{{:pedoffice:blau_07.png?direct&20|07}}]] directions for importing measurements here. Mostly used values of the manufactures.
^Manufacture^X^Y|
|easyped|72 dpi|72 dpi|
|Rotballer|150 dpi|150 dpi|
=== 3D Scanner ===
For further manufacturer-specific settings, please contact the [[service@pedcad.de|pedcad Service]].
=== pressure plate ===
For further manufacturer-specific settings, please contact the [[service@pedcad.de|pedcad Service]].
=== insole pressure measurement ===
For further manufacturer-specific settings, please contact the [[service@pedcad.de|pedcad Service]].
===== 9. Prices =====
{{:en:pedoffice:optionen:optionen_preise_en.png?nolink&700x378}}