Pedcad Help

Diese Seite ist nicht editierbar. Sie können den Quelltext sehen, jedoch nicht verändern. Kontaktieren Sie den Administrator, wenn Sie glauben, dass hier ein Fehler vorliegt.
===== 8. Devices =====

Measurement devices can be activated and deactivated to make the measurement bar clearer for deposits and valinos orders.

{{:en:pedoffice:optionen:optionen_geraete_en.png?nolink&700x379}}

==== Activate/ deactivate devices ====

=== 2D Scanner ===

With activating the checkbox [[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_01.png|{{:pedoffice:blau_01.png?direct&20|01}}]] „Device installed“ the device will be activated.

=== 3D Scanner ===

With activating the checkbox [[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_08.png|{{:pedoffice:blau_08.png?direct&20|08}}]] „Device installed“ the device will be activated.

=== Pressure plate ===

With activating the checkbox [[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_09.png|{{:pedoffice:blau_09.png?direct&20|09}}]] „Device installed“ the device will be activated.

=== insole pressure measurement ===

With activating the checkbox [[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_10.png|{{:pedoffice:blau_10.png?direct&20|10}}]] „Device installed“ the device will be activated.

==== individual settings ====

=== 2D Scanner ===

== Only one foot ==

[[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_02.png|{{:pedoffice:blau_02.png?direct&20|02}}]]This option is for scanners that can only measure one foot or for importing individual measurements that still need to be processed in the scan window.

== show scanner dialog ==

[[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_03.png|{{:pedoffice:blau_03.png?direct&20|03}}]]By activating the checkbox, the scanner dialog is displayed by the scanner driver. This is necessary, for example, for a scanner from the manufacturer Mustek.

== Show resolution dialog ==

[[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_04.png|{{:pedoffice:blau_04.png?direct&20|04}}]]If this option is activated, the resolution dialog will be displayed each time you import, so that you can adjust the resolution individually for each measurement.

== Use resolution from file ==

[[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_05.png|{{:pedoffice:blau_05.png?direct&20|05}}]]The resolution from the file which was imported is always used if the resolution dialog is not displayed.

== standard resolution ==

[[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_06.png|{{:pedoffice:blau_06.png?direct&20|06}}]]+ [[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_07.png|{{:pedoffice:blau_07.png?direct&20|07}}]]Set the default resolution for the X- [[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_06.png|{{:pedoffice:blau_06.png?direct&20|06}}]] and Y- [[http://pedcad.info/lib/exe/fetch.php?media=pedoffice:blau_07.png|{{:pedoffice:blau_07.png?direct&20|07}}]] directions for importing measurements here. Mostly used values of the manufactures.

^Manufacture^X^Y|
|easyped|72 dpi|72 dpi|
|Rotballer|150 dpi|150 dpi|

Bearbeiten

=== 3D Scanner ===

For further manufacturer-specific settings, please contact the [[service@pedcad.de|pedcad Service]].

=== pressure plate ===

For further manufacturer-specific settings, please contact the [[service@pedcad.de|pedcad Service]].

=== insole pressure measurement ===

For further manufacturer-specific settings, please contact the [[service@pedcad.de|pedcad Service]].

=====   =====